What should I do if the advertising engraving machine is too dusty to use?
During the working process of the advertising engraving machine, a large amount of corrosive dust and smoke will be generated during the processing of the workpiece, and these smoke and dust will temporarily accumulate on the surface of the guide rails and linear axes, which will have a great impact on the processing accuracy of the advertising engraving machine equipment. It will have a large impact and will form corrosion spots on the surface of the linear axis of the guide rail, shortening the service life of the equipment. So what should we do when encountering this situation? Very simple–
1. Avoid equipment such as strong electricity and strong magnetism that seriously affects the signal transmission of the engraving machine.
2. The voltage needs to be stable. To avoid large fluctuations, it is best to use a voltage stabilizer.
In addition, let’s talk about the maintenance of advertising engraving machines.
Every time the machine is used, pay attention to cleaning. Be sure to clean up the dust on the platform and transmission system, and lubricate the transmission system (X, Y, Z axis) regularly (weekly). (Note: X, Y, Z three-axis polished rods should be maintained with engine oil; add high-speed butter to the screw rod part; if the operating environment temperature is too low in winter, the screw rod and polished rod (square guide rail or circular guide rail) parts should be flushed and cleaned with gasoline first , and then add engine oil, otherwise it will cause excessive resistance in the transmission part of the machine and cause machine misalignment).
