1325 ATC Wood Router

Description

The 1325 ATC Wood Router is a commonly used CNC woodworking engraving machine. With a maximum processing size of 130cm × 250cm × 20cm, it is primarily used for cutting and engraving wood materials such as doors and MDF board. The 1325 ATC Wood Router’s body is constructed of thick-walled steel tubing, and the Y-axis utilizes dual-track, double-sided drive to enhance cutting performance. The tabletop is equipped with a vacuum suction device for Bakelite and is divided into six processing zones. The control system supports DSP or Weihong CNC systems and features USB transfer, breakpoint resume, and power-off memory. It boasts a maximum travel speed of 45,000mm/min and an engraving speed of 15,000mm/min, with a positioning accuracy of 0.01mm. It is suitable for engraving and cutting curved surfaces on wood materials such as solid wood doors and antique furniture.
Key features of the 1325 ATC Wood Router:
1. The 1325 ATC Wood Router’s body is constructed of thick-walled steel tubing. The bed has been designed and analyzed using Finite Element Analysis (FEA), providing a rigid and stable machining platform. All bed components are stress-relieved prior to machining.
2. The 1325 ATC Wood Router is the most cost-effective and economical model among SUBA-CNC engraving machines. It features a domestically produced 4.5kW electric spindle (with an optional imported Italian HSD electric spindle) and a 5.5kW centrifugal vacuum pump.
3. The tabletop utilizes a vacuum suction surface made of bakelite, which is heat-resistant and corrosion-resistant, and can strongly absorb non-metallic materials of varying sizes. The vacuum table is divided into six processing areas, allowing for single-zone or simultaneous processing, improving efficiency.
4. The machine’s Y-axis utilizes dual-track, double-sided drive, enabling heavy-duty cutting.
5. The embedded DSP CNC system, utilizing USB transmission, supports breakpoint resume and power-off memory functions. 128MB of Flash memory is standard, enabling fully offline operation.
6. High processing speed and efficiency, with an idle speed of up to 45,000 mm/min and, when engraving corrugated board, up to 15,000 mm/min.
7. The 1325 ATC Wood Router is applicable for: solid wood doors, MDF, rigid plastics, antique furniture, solid wood art murals, and 3D curved and contoured cutting of musical instruments. The 1325 ATC Wood Router is one of the most popular engraving machine models used by wood door manufacturers. Many companies working on paint-free and solid wood doors choose the 1325 ATC Wood Router because it is ideally suited to the size of wood doors, is easy to use, and delivers fast processing times.

​

Product display

[wpforms id=”118″]