Description

Hardwood plywood, as the name suggests, is made of layers of hardwood veneers. These veneers are carefully cut from hardwoods such as birch, maple, oak, or mahogany. The wood used in hardwood plywood is renowned for its strength, durability, and aesthetic appeal.

Hardwood plywood involves layering hardwood veneers with alternating grain directions and bonding them together with a strong adhesive, typically under high pressure and temperature. This cross-grain technique enhances the plywood’s strength, stability, and resistance to warping or twisting, making it ideal for applications where structural integrity and lifespan are paramount.

The manufacturing process of hardwood plywood involves several steps, beginning with the selection of high-quality hardwood logs. The logs are then softened by steaming or soaking, allowing thin, continuous veneers to be peeled off. These veneers are carefully inspected, graded according to quality, and then dried to a specific moisture content. The dried veneers are then layered with alternating grain directions, bonded together with a strong adhesive, and then pressed under high pressure and temperature to form the final hardwood plywood.

Characteristics of Hardwood Plywood:

Item	Hardwood Plywood	Cork plywood
Strength and hardness	Hardwood Plywood are generally stronger and harder, able to withstand heavy loads and impacts. Suitable for structural applications, furniture, and high-traffic areas.	It generally has lower strength and hardness, making it suitable for applications with moderate load-bearing requirements, such as wall panels, subflooring, and packaging.
Durability	Hardwood Plywood are highly durable and resistant to dents, scratches, and wear. They maintain their integrity for a long time, even in harsh environments.	Medium durability; may be more prone to dents and scratches compared to hardwood plywood. Suitable for applications with low wear and tear.
Weight	Hardwood Plywood have a higher density and are heavier, offering stability and sound insulation. They are suitable for applications where weight is not a constraint.	Lighter weight, easier to handle and transport. Suitable for projects with high weight requirements, such as rooftop or elevated applications.
Appearance	Hardwood Plywood offers a range of captivating textures and colors suitable for furniture and decorative applications. It can be stained or finished to enhance its natural beauty.	The textured pattern may not be very obvious, but it can be dyed or painted to achieve the desired aesthetic effect. It is often used in situations where it needs to be covered with other materials.
Price	Hardwood plywood are generally more expensive due to the high quality of the hardwoods used. The cost will vary depending on the specific type of hardwood used.	More economical and cost-effective, it is a high-value option for various projects. Costs will vary depending on the specific softwood variety and plywood grade.
Machinability	Hardwood plywood are more challenging to work with due to their higher hardness. Sharp tools and careful handling are required to achieve clean, sharp cuts and avoid chipping.	Because of its soft texture, it is generally easy to work with. It can be cut, shaped, and fastened using standard woodworking tools.
Moisture resistance	Hardwood Plywood vary depending on the type of hardwood used. Some hardwoods (such as teak) have natural moisture-resistant properties.	It varies depending on the specific type of cork used. Some corks, such as red cedar, have natural moisture-resistant properties.

Classification, characteristics and application scope of ordinary plywood
Item	Corresponding	Use of rubber and product performance	Available	Application
Class I (NQF) weather-resistant and boiling water-resistant plywood Board	WPB	It is durable, resistant to boiling or steam treatment and antibacterial. Made of phenolic resin glue or other high-quality synthetic resin glue with equivalent performance.	Outdoor	Used in aviation, ships, carriages, packaging, concrete formwork, water conservancy projects and other places requiring good water resistance and weather resistance
Class II (NS) water-resistant plywood Sheet	WR	It can be immersed in cold water, can withstand short-term hot water immersion, and has antibacterial properties, but is not resistant to boiling. It is made of urea-formaldehyde resin or other adhesives with equivalent performance.	Indoor	Used for interior decoration and packaging of carriages, ships, furniture, and buildings
Class III (NC) moisture-resistant plywood Pannels	MR	It can withstand short-term cold water immersion and is suitable for indoor use under normal conditions. It is made of urea-formaldehyde resin with low resin content, blood glue or other adhesives with equivalent performance.	Indoor	For furniture, packaging and general construction purposes
Class IV (BNS) non-moisture-resistant plywood Board	INTUsed in normal indoor conditions, it has a certain bonding strength. Made of bean glue or other adhesives with equivalent performance		Indoor	Mainly used for packaging and general purposes. Tea boxes require soybean glue plywood
Note: WPB is boiling water resistant plywood; WR is water resistant plywood; MR is moisture resistant plywood; INT is non-water resistant plywood.

PRODUCT DETAILS

Product Name	Melamine Plywood
Size(mm)	12202440mm,12502500m, or upon request
Glue	WR,WBP,E0,E1,E2
Core	Poplar,hardwood,eucalyptus,combi
Thickness(mm)	1.5-25mm or as your requested
Thickness Tolerance	+/-0.2mm (thickness<6mm), +/-0.3~0.5mm (thickness≥6mm)
Usage	For furniture,packing,decoration
Moisture	<14%
Certification	CE, SGS, Carb, FSC, ISO9001
Packing details	Inner Packing-Pallet is wrapped with the 0.20mm plastic bag Outer Packing-pallets are covered with plywood or carton boxes and strong steel
Loading Quantity	1×20’GP	8pallets/22CBM
	1×40’GP	16pallets/45CBM
	1×40’HQ	18pallets/53CBM
MOQ	1×20’GP
Payment Terms	D/P, T/T or L/C at sight
Shipping date	Usually within 15-20 days after receipt of prepayment .

PRODUCT IMAGE


Commercial Plywood	Fancy Plywood	Film Faced Plywood	Fire Retardant Plywood

Marine Plywood	Melamine Plywood	Veneer Faced Plywood	Water Resistant Plywood

PRODUCTION PROCESS

EXHIBITION OF COOPERATION

PRODUCT PACKAGE

FAQ

Q:Can I get samples before order ?

A:Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.

Q:Can I go to your factory to visit?

A:Of course, we welcome customers from all over the world to visit our factory.

Q:What product information do I need to provide?

A:You need to provide the size and the number of tons you need to purchase.

Q:Does the product have quality inspection before loading?

A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept third party inspection.

Q:How do we trust your company?

A:We specialise in steel business for years, headquarter locates in Liaocheng, Shandong province, you are welcome to investigate in any ways, by all means, we have CE and ISO9001 certificate, quality can be guaranteed.

Hardwood Plywood